Model:HSA-T001S
Connecting to Cortana
1
Install
Cortana Device Setup
from the Windows Store or the
Cortana
app from the Google Play Store or Apple App Store.
2
Connect the USB cable to the AC adapter
1
, and then connect the
AC adapter to an AC outlet
2
. Connect the other end of the cable to
the micro-USB port on the speaker
3
.
2
1
3
3
When you hear the voice prompt, run
Cortana Device Setup
or
the
Cortana
app on your device, and then say or enter
Setup my
speaker
to connect the speaker to your Wi-Fi network.
You must create a Microsoft account.
4
After the setup is complete, say
"Hey Cortana"
to activate Cortana,
and then say a voice command after the speaker light turns on.
Connecting to Bluetooth
DEVICES
HP Speaker
OR
Say
"Hey Cortana,"
and then say, "
Pair to my Bluetooth device."
Components
4 m
(13.1')
4 m
(13.1')
RMN/
型號/型号
: HSA-T001S
© Copyright 2017 HP Development Company, L.P.
Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. Cortana and Skype
are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other
countries. The Spotify Software is subject to third party licenses found here: www.spotify.com/connect/
third-party-licenses.
The information contained herein is subject to change without notice. The only warranties for HP products
and services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
First Edition: December 2017
1
Insert a paper clip and press for five seconds to restore factory
settings.
2
On: Speaker is active.
Rippling: The speaker is in pairing mode.
3
Press to start Bluetooth® pairing, answer or end a call, pause
music, or turn off an alarm. Press twice to ignore a call. The action
performed depends on the active function, such as Skype® or
Spotify Connect.
Press for three seconds to activate Cortana.
4
Press to mute or unmute the microphone.
On: The microphones are muted.
3
4
=
=
=
=
1
2
Replace this box with PI statement as per spec.
Replace this box with PI statement as per spec.
Replace this box with PI statement as per spec.
Replace this box with PI statement as per spec.
*L05318-B21*
L05318-B21
Hello.
How can I help you?
=
<1s
=
>1s
