HP Modular Power Distribution
Unit Kit
Installation Instructions
Overview
These installation instructions are provided to assist qualified
personnel with the installation of the HP Modular Power Distribution
Unit (mPDU) Kit.
The input voltage of a single phase mPDU is either 100 to 127 VAC
or 200 to 240 VAC, depending on the model.
The input voltage of a three phase mPDU is 200 to 240 VAC, phase-
phase or phase-neutral, depending on the model.
The control unit (if included) provides the following features:
•
Flexible mounting in 0U or 1U configurations, maximizing rack
space (no additional parts are required for mounting)
•
Overcurrent and short-circuit protection for each output (UL-
489-listed circuit breakers)
•
Manual on/off control for each of the output load groups
•
Pilot light for main AC input (depending on the model)
•
IEC-320 C19 outlets to power extension bars or other IEC-320
C20 plug-compatible equipment
•
Easy identification and reset of overload circuits (circuit
breakers move to Off position), minimizing downtime
•
Power cord retention
•
Recessed handles to prevent inadvertent power-off
The extension bars (if included) provide the following features:
•
Multiple power outlets, conveniently located for quick and easy
equipment power connections
•
Lighted main power indicator
•
Attached 2-m (6-ft) input power cords
•
Power cord retention and power cord labeling
Modular PDU models
To view the most recent modular PDU information, see the HP
website (http://www.hp.com/go/rackandpower).
From there, you can navigate to the appropriate page by following
the steps below.
1.
Click
Power infrastructure.
2.
Click
Power distribution units.
3.
Click
Modular.
© Copyright 2006, 2008 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
Part Number 240824-4 2
October 2008 (Tenth Edition)
0
Summary of Contents for 252663-B24 - PDU Power Distribution Strip
Page 4: ...Installing the 0U brackets Installing the 1U brackets ...
Page 8: ......
