HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive User Manual Download

Page: 1 / 48

Reference

Guide

HP StorageWorks

1000 Modular Smart Array

Second Edition (July 2006)

Part Number: 347280-002
The HP StorageWorks 1000 Modular Smart Array (MSA1000) is a 2-Gb Fibre Channel

storage system designed for the entry-level to mid-range Storage Area Network (SAN).

Designed to reduce the complexity, expense, and risk of SAN deployments in heterogeneous

configurations, the MSA1000 provides a scalable, high-performance system.

Summary of Contents for 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

















































Search results

Summary of Contents for 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Reviews:

Related manuals for 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Brands by name

Popular brands

HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive, Reference Manual

Search results

Summary of Contents for 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Reviews:

Related manuals for 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive

Brands by name

Popular brands