The HP 10GbE Pass-Thru Module is designed for c-Class BladeSystem and HP Integrity Superdome 2 customers requiring a non-
blocking, one -to-one connection between each server and the network. The pass-thru module provides 16 uplink ports that accept
both SFP and SFP+ connectors.
The HP 10GbE Pass-Thru Module can support 1Gb and 10Gb connections on a port by port basis. Optical as well as Direct Attach Copper
(DAC) cables are also supported. Both standard Ethernet as well as Converged Enhanced Ethernet (CEE) traffic to an FCoE capable
switch is possible when using the appropriate NIC or adapter module.
HP 10GbE Pass-Thru Module
1. UID LED
4. Reset Button
2. Health LED
5. Mini USB RS-232 management port
3. Ethernet port link status and speed LEDs
6. Uplinks ports that accept SFP and SFP+ transceiver modules
and Direct Attach Cables (DAC)
What's New
Support for HP ProLiant G7 servers
Support for Converged Network Adapters
At A Glance
Performance
:
16 direct server to network connections
Auto-sense 1Gb or 10Gb operation on a port by port basis
Supports standard Ethernet as well as Converged Enhanced Ethernet
Supports all NICs and mezzanine adapters including Flex Adapters
Management
:
No management required
Module performance monitored by the On-Board Administrator
Front panel or OA access for service and test and firmware updates
QuickSpecs
HP 10GbE Pass-Thru Module
Overview
DA - 13508 North America — Version 8 — August 17, 2012
Page 1
