background image

Operation & Installation Guide

 

Model 

2050 / 2050E

Read These Instructions Very Carefully!

Limited Warranty

Home and Office Security Safes

MHAS2050E0807 

ENGLISH

If your Honeywell safe fails to operate because of a manufacturing defect any time up to five (5) 

years from the date of original purchase, we will, at our discretion, repair or replace the unit at no 

charge to the original owner.  A copy of your sales receipt is required as Proof of Purchase.

The consumer must first contact SISCO® Customer Service (800-223-8566, USA and Canada; 

310-638-1182 outside of USA and Canada, or via E-mail at [email protected]

during the Term of the Limited Warranty for authorization on the repair or replacement of the safe.  

For the repair of the safe, SISCO Customer Service may provide approval for taking it to a local 

locksmith.  For the replacement of the safe, the consumer must return it, prepaid, to SISCO 

(2835 E. Ana St., Rancho Dominguez, CA  90221).  SISCO will replace the safe with a comparable 

model, shipping prepaid.

WHAT  IS  NOT  COVERED

SISCO’s responsibility and the consumer’s rights are limited to the repair or replacement of the 

defective safe, as stated above.

This Warranty does not apply if the product has been damaged by improper installation, neglect, 

accident, misuse, exposure to extremes of heat or humidity, terrorism, war, acts of God, or as a 

result of service or modification by other than an authorized service center.  While your SISCO safe is 

warranted to be free of mechanical defect during the Term of Limited Warranty, the Warranty does 

not apply to the finish of the safe.  

SISCO is not responsible for any costs associated with removing or installing this product.  

SISCO is not responsible for damage or loss of the contents of the safe nor for the unauthorized 

removal of contents.  

SISCO is not responsible for any damages incurred to the safe during shipment.  

This Limited Warranty applies only to new SISCO safes, purchased by the original owner, and is not 

transferable to second owners or “factory seconds” safes purchased by the consumer.

No implied Warranty of salability or fitness exists other than those descriptions provided on the 

packaging, instructions and advertising.  No other covenants or warranties, either implied or stated, 

written or oral, are hereby present.  Some states do not allow limitations on how long an implied 

Warranty lasts, so the above limitations may not apply to you.

This Warranty gives you specific rights and you may also have other rights which vary from state to 

state.

The Honeywell trademark for Home/Office Safes is used with permission.  Honeywell Safes are 

distributed exclusively by SISCO.  Honeywell makes no representations or warranties with respect to 

this product or service.  The Honeywell Trademark is used under license from Honeywell Intellectual 

Properties Inc. by SISCO.

Summary of Contents for 2050

















Reviews: