background image

INSTRUCTION MANUAL

Thank you for purchasing Hitachi gas table. Please read this operating instruction manual 
carefully before using this gas table properly. We hope you are satisfied with our product.

1

CONTENTS

n

 

NAME OF PARTS                                                               .............................................1

   INSTALLATION OF GAS TABLE and                                ........

3

   HOW TO USE

n
n

n

 SPECIAL CAUTIONS AND SPECIFICATIONS                  .............................................2
 PREPARING THE UNIT FOR USE,                     

 

......................................

 MAINTENANCE AND CARE and TROUBLESHOOTING ..............................................4

Summary of Contents for MPH-110RI

Page 1: ...ng instruction manual carefully before usingthisgas tableproperly We hopeyouaresatisfiedwithourproduct 1 CONTENTS n NAME OF PARTS 1 INSTALLATION OF GAS TABLE and 3 HOW TO USE n n n SPECIAL CAUTIONS AND SPECIFICATIONS 2 PREPARING THE UNIT FOR USE MAINTENANCE AND CARE and TROUBLESHOOTING 4 ...

Page 2: ... and cracks due to use may result in gas leaks Immediately replace rubber hose when it gets damaged orcracked 10 Trivet top plate and other parts become hot during use Therefore touch no part of the gas table except the ON OFF knobs 11 Takenote that no boiling water shouldspill ontothe gas table stop surface 12 If you notice gas leakage stop using the gas table at once close the gas stopcock and o...

Page 3: ...t pipe Rubber hose Hose clamp l Do not route the rubber hose under the gas table Do not place any objects that may easily be blown away by the wind on the gas table l l Never use one single rubber hose fortwo gas tables Keep away flammable material liquidfrom thegas table l Makesurethat allknobs ofthe gas table areatthe OFF position and openfully the gas stopcock ofgas cylinder 1 Ignition andFlame...

Page 4: ...t open Air remains in the gas piping Dirty electrode or insulator Bent or crushed rubber hose Make sure the ignition knob is at OFF position then openthe main gascock fully Repeat igniting operation until all air in the pipe is completely purged Cleanit witha dry rag Straightengas hose Cracks or holes in the rubber hose Rubber hose not connected well Failure or the gas table cock Replace it with a...

Reviews: