background image

ENGLISH

1

HAS-WM03

Wall mount unit for LCD projectors

Model name

HAS-WM03

User’s Manual

The following symbols are used in this manual to help you use this product safely and correctly, and to prevent injury 

to yourself and others or damage to property. Read through the safety instructions below so you can operate the 

product correctly.

WARNING

This symbol indicates information that, if ignored, could result in serious personal injury 

or even death due to incorrect handling.

CAUTION

This symbol indicates information that, if ignored, could result in personal injury or 

physical damage due to incorrect handling.

Indicates a prohibited action. 

This symbol is accompanied by text indicating an action that must not be taken. 

Indicates a mandatory action. 

This symbol is accompanied by text indicating an action that must be taken. 

Table of Contents

Safety Symbols

Thank you for purchasing a wall mount unit specially designed for Hitachi LCD projectors. 

Be sure to read this manual and the User’s Manual supplied with the LCD projector before use so you will know 

how to install it properly. After you have finished reading these documents, put them away in a safe place for future 

reference.

Disclaimer ................................................ 1

Table of Contents ..................................... 1

Safety Symbols ........................................ 1

Overview ................................................... 2

Installation Precautions .......................... 2

Tools needed for installation .................. 2

To the customer ....................................... 3

To service personnel ............................... 3

Routine Inspections ................................ 3

Contents of this package ........................ 4

Installation procedure ............................. 5

1

 Removing Arm bracket (IN) ...................... 5

2

 Attaching the base bracket (B)  

to the wall  ............................................. 6

3

 Attaching the Arm bracket (OUT) ............10

4

 Securing Arm bracket (OUT) using screws ...10

5

 Attaching bracket (D) ...............................11

6

 Attaching Adjusting block (C) ..................11

7

 Attaching Arm bracket (IN) ......................12

8

 Attaching LCD projector ..........................12

9

 Connecting cables ...................................12

Adjustments ............................................13

0

 Displaying image for making  

adjustments  .........................................13

!

 Image adjustments ..................................14

Installing exterior parts ..........................17

@

 Procedure for installing exterior parts .....17

#

 Connecting cables ...................................19

$

 Attaching the cable cover ....................... 20

Adjustment precautions ........................ 21

Adjustment specifications

 .................... 22

Applicable models ................................. 23

●   The content of this manual and the specifications of the product it describes are subject to 

change without prior notice.

●   Note that Hitachi will accept no liability whatsoever for injuries and damages arising from 

incorrect use or handling that exceeds normal operating limits. 

Disclaimer

Summary of Contents for HAS-WM03
























Reviews: