background image

[NEW FEATURES]

        This product performs both shrub shearing and

grass shearing functions.

        A 10.8 V lithium-ion battery (Model BCL1015) is

included.

        A low charge warning lamp is included.

A large work area can be covered on a single charge.

        A soft grip handle is attached.
        The handle is thin along its circumference.
    A large-size protector is attached.

An adjuster is included for adjusting shearing height.

LIST Nos.
CH 10DL: H832
CG 10DL: H833
Mar. 2009

This product includes a 10.8 V lithium-ion battery.
This new product offering the features below will be released to increase market share and sales of the
Gardening Tool Series.
(1) The main body of this product accepts both a shrub shear blade and a grass shear blade.
(2) A newly developed 10.8 V/1.5 Ah, lithium-ion battery is included.
(3) A low charge warning lamp is included.
(4) A large work area can be covered on a single charge.
(5) A soft grip handle is attached.
(6) The handle is thin along its circumference.

Shrub shear

x

 For trimming hedges and pruning garden trees

Grass shear

x

 For mowing lawns

International Sales Division

MARKETING OBJECTIVE

APPLICATIONS

SELLING POINTS

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.

PRODUCT NAME

Hitachi 10.8 V Cordless Shrub Shear

Model

CH 10DL, CH 10DL (CG)

Hitachi 10.8 V Cordless Grass Shear

Model

CG 10DL

Shrub shear

Grass shear

C

Summary of Contents for CG 10DL


























Reviews: