background image

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.

 

Plasma Display

December  2006

YK

No.040E

SERVICE MANUAL

50PD9800TA(FW1)

Be sure to read this manual before servicing.  To assure safety from 

fi

 re, electric shock, injury, harmful 

radiation and materials, various measures are provided in this HITACHI display.  
Be sure to read cautionary items described in the manual to maintain safety before servicing.

Caution

 

1. Since Panel Module and front Filter are made of glass, handling the broken Module and Filter shall be 

taken care suf

fi

 ciently in order not to be injured.

2. Replacing work shall be started after the Panel Module and the AC/DC Power supply become suf

fi

 -

ciently cool.

3. Special care shall be taken to the display area in order not to damage its surface.
4. The Panel Module shall not be touched with bare hand to protect its surface from stains.
5. It is recommended to use clean soft gloves during the replacing work in order to protect not only the 

display area of the Panel Module but also a serviceman himself.

6. The Chip Tube of Panel Module (located upper left of the back and surrounded by frame) and 

fl

 exible 

cables connecting Panel glasses to drive circuit PWBs are very weak, so shall be taken care suf

fi

 -

ciently not to break. If you break Chip Tube, the Panel doesn’t display anything forever.

Service Warning

  

1. Features ----------------------------------------------- 3
2. Speci

fi

 cations ----------------------------------------- 4

3. Service point ------------------------------------------ 5
4. Component names ---------------------------------- 6
5.  New adoption technology -------------------------- 8
6. Adjustment ------------------------------------------ 12
7. Troubleshooting ------------------------------------ 28
8. Self-diagnosis function --------------------------- 32

9. Basic circuit diagram ------------------------------ 35
10.Printed wiring board diagram ------------------- 57
11.Block diagram -------------------------------------- 62
12.Connection diagram ------------------------------ 63
13.Wiring diagram ------------------------------------- 64
14.Disassembly diagram ---------------------------- 66
15.

Replacement Parts list

 ----------------------------- 71

Contents 

The PDP panel made from FHP is used for this product.

Summary of Contents for 50PD9800TA

























































































Reviews: