GE Appliances
Louisville, KY 40225
239D5090P001
Part Install Instructions
GE Appliances
Parts Included:
Duct Tower Assembly with Fresh Food
Fan Motor
Air Flow Check Strips (attached to the
duct tower to verify proper air flow)
Instruction Sheet
WR49X26666
Replacing the duct tower
assembly:
Step 1- Disconnect power to the refrigerator.
Step 2- Remove the fresh food shelves and
drawers.
Step 3- Remove the deli pan covers and deli
pan slides.
Step 4 - Press down and remove the fan
harness cover, then disconnect the fan
connector.
Fresh Food Fan Moisture Kit
!
IMPORTANT SAFETY NOTICE
The information in this part instruction is intended for use by
individuals possessing adequate backgrounds of electrical,
electronic and mechanical experience. Any attempt to repair a
major appliance may result in personal injury and property
damage. The manufacturer or seller cannot be responsible for the
interpretation of this information, nor can it assume any liability in
connection with its use.
!
WARNING
To avoid personal injury, disconnect power before servicing this
appliance. If electrical power is required for diagnosis or test
purposes, disconnect the power immediately after performing the
necessary checks. RECONNECT ALL GROUNDING DEVICES If
grounding wires, screws, straps, clips, nuts, or washers used to
complete a path to ground are removed for service, they must be
returned to their original position and properly fastened.
WR49X26666
