background image

GE Consumer & Industrial Appliances

Assembly Instructions

Advantium

®

Built-In Accessory Storage Drawer

JX2200, JX2201, ZX2201

MFL06213304   49-40594   12-08 JR

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

BEFORE YOU BEGIN

Read these instructions completely and carefully. Read
the Installation Instructions for the Advantium 120V or
240V oven completely and carefully for cutout dimen-
sions and step-by-step instructions.

IMPORTANT

Save these instructions for

local inspector’s use. 

IMPORTANT

Observe all governing codes

and ordinances.

• 

NOTE TO INSTALLER:

Be sure to leave these 

instructions with the Consumer.

• 

NOTE TO CONSUMER:

Keep these instructions with

your Advantium 120V or 240V Oven Owner’s Manual
for future reference.

• 

SKILL LEVEL:

Installation of this appliance requires

basic mechanical skills.

• 

COMPLETION TIME:

One hour with the installation

of an Advantium 120V or 240V oven.

• 

Proper installation is the responsibility of the installer.

• 

Product failure due to improper installation is not 
covered under the Warranty. See the Advantium 
120V or 240V Oven Owner’s Manual for warranty
information.

TOOLS REQUIRED

• #2 Phillips screwdriver

PARTS SUPPLIED

• Side supports (2)
• Brass screws (8)
• Color-matched screws (5)

MODELS AVAILABLE

Profile Models:

JX2200BB–Black
JX2201SS–Stainless Steel

Monogram Models:

ZX2201SS–Stainless Steel (for installation above 36

only)

NOTE: Advantium 240V model ZSC2202SS and
Advantium 120V model ZSC1202 CANNOT be
installed with an accessory storage drawer.

See

Installation Preparation Without an Accessory Storage
Drawer

in the Installation Instructions for these models.

PRODUCT DIMENSIONS AND CLEARANCES

Allow 15” Clearance 

When Fully Open

5”

REMOVE PACKAGING AND PARTS

• Remove the drawer from the carton.
• Remove all packing material and tape.
• Open the drawer and remove any parts inside.
• Locate parts.

1

Assembly Instructions

Side Supports (2)

Under-the-Counter (UTC)

Mounting Bracket

Color-Matched

Screws 

(4 required, 

1 extra)

Screws 

(6 required, 

2 extra)

NOTE:

Appearance will vary by model.

• Under-the-Counter

Mounting Bracket (1)

Summary of Contents for Monogram Advantium ZX2201NSS

Page 1: ...ility of the installer Product failure due to improper installation is not covered under the Warranty See the Advantium 120V or 240V Oven Owner s Manual for warranty information TOOLS REQUIRED 2 Phillips screwdriver PARTS SUPPLIED Side supports 2 Brass screws 8 Color matched screws 5 MODELS AVAILABLE Profile Models JX2200BB Black JX2201SS Stainless Steel Monogram Models ZX2201SS Stainless Steel fo...

Page 2: ... damage to the drawer since the front edge of drawer hangs below the bottom of drawer Place the oven on top of the storage drawer Make sure that the back and sides of the oven align with the back and sides of drawer NOTE The bottom of the oven side flanges will sit directly in front of the top of the storage drawer side flanges B A 3 ASSEMBLING THE OVEN TO DRAWER cont Remove the front two bottom s...

Page 3: ...no cubre las fallas del producto debido a una instalación incorrecta Ver el Manual del Propietario del horno Advantium de 120V o 240V para información sobre la garantía HERRAMIENTAS REQUERIDAS Destornillador de estrella 2 PIEZAS PROVISTAS Soportes laterales 2 Tornillos 8 Tornillos de color 5 MODELOS DISPONIBLES Modelos Profile JX2200BB Negro JX2201SS Acero inoxidable Modelos Monogram ZX2201SS Acer...

Page 4: ...nferior del cajón Coloque el horno sobre el cajón de almacenamiento Verifique que la parte trasera de los costados del horno se encuentren alineados con la parte trasera y los lados del cajón NOTA La parte inferior de las bridas laterales del horno descansan directamente frente a la parte superior de las bridas laterales del cajón de almacenamiento B A 3 CÓMO MONTAR EL HORNO AL CAJÓN cont Quite lo...

Reviews: