background image

Summary of Contents for FPDW

Page 1: ...t blade screwdriver WASHER INSTALLATION Washer Hardware Remove the 24 3 8 x 27 x 12 pedestal installation hardware and instructions from the shipping carton Using the pedestal shipping carton for protection carefully lay the washer on its back NOTE If washer was previously installed disconnect from power supply remove inlet hoses from water faucets and tape the drain hose to the top front of the w...

Page 2: ...o the areas shown below NOTE The adhesive backing must be applied to the rear surface of the drawer area Replace the dispenser drawer 12 Refer to the installation instructions that came with the washer to properly complete water drain and electrical connections NOTE Since the pedestal will increase the washer height 12 inches the minimum standpipe height will increase from 24 inches to 36 inches I...

Page 3: ...destal Tighten securely Insert the two 2 10 16 x 1 screws supplied with the kit through the holes in the dryer front panel and install into the front mounting brackets Tighten securely Using four 4 8 18 x 3 8 self tapping screws supplied with the kit attach the rear mounting brackets to the rear of the pedestal Tighten securely 10 Reinstall the hole plugs removed in step 2 Refer to the installatio...

Page 4: ...bill of sale The date of the bill establishes the warranty period should parts be required This written warranty gives you specific rights You may also have other rights which vary from state to state Warranty Restriction If the pedestal is used for any other purpose than private family use or used with any product that requires modification for installation the warranty is null and void Warranty ...

Reviews: