background image

MODEL NO.

 

1900

5

LO

FOR INDOOR USE ONLY 

IMPORTANT SAFETY 
INSTRUCTIONS 

When using electric

al

 products, basic precautions should always be followed 

including the following: 

a)

READ AND FOLLOW ALL

SAFETY INSTRUCTIONS.

b) Do not use seasonal products outdoors unless marked suitable for indoor

and outdoor use.

c) This seasonal use product is not intended for permanent installation or use.
d) Do not mount or place near gas or electric heaters, fireplaces, candles or

other similar sources of heat.

e) Do not secure the wiring of the product with staples or nails, or place on

sharp hooks or nails.

f) Do not let lamps rest on the supply cord or on any wire.
g) This is an electric product-not a toy! To avoid risk of fire, burns, personal

injury and electric shock it should not be played with or placed where
small children can reach it.

h) Do not use this product for other than its intended use.
i) Do not hang ornaments or other objects from cord, wire, or light string.
j) Do not close doors or windows on the product or extension cords as this

may damage the wire insulation.

k) Do not cover the product with cloth, paper or any material not part of the

product when in use.

l)This product is equipped with push-in type lamps. Do not twist lamps.
m) Read and follow all instructions that are on the product or provided with

the product.

n)

SAVE THESE INSTRUCTIONS

USE AND CARE INSTRUCTIONS 

a) When the product is placed on a live tree, the tree should be well

maintained and fresh. Do not place on live trees in which the needles are 
brown or break off easily. Keep the tree holder filled with water. 

b) If the product is placed on a tree, the tree should be well secured and

stable.

c) Before using or reusing, inspect product carefully. Discard any products

that have cut, damaged, or frayed wire insulation or cords, cracks in the
lampholders or enclosures, loose connections, or exposed copper wire.

d) When storing the product, carefully remove the product from wherever it is

placed, including tree, branches, or bushes, to avoid any undue strain or
stress on the product conductors, connections, and wires.

e) When not in use, store neatly in a cool, dry location protected from

sunlight.

USER SERVICING INSTRUCTIONS 

Replace the lamp. 

1. Grasp plug and remove from the receptacle or

other outlet device. Do not unplug by pulling cord.

2. Pull lamp and plastic base straight out of lampholder.
3. Replace lamp with only 3.3 Volt, 0.066 Watt,

LED type lamp (provided with product).

If the new lamp base does not fit in lampholder, follow the steps below step 3. 
a) Remove the base of burned out lamp by straightening lamp leads and

gently pull lamp out.

b) Thread leads of new lamp through holes in old base with one lead in each

hole.

c) After lamp is fully inserted into base, bend each lead up, like other lamps

in the light set so that the leads will touch the contacts inside the
lampholder.

CAUTION:

1. Risk of fire. This product does not contain lamp shunts, which allow the

product to operate if one lamp burns out. Do not replace lamps with other
than the spare lamps provided with this product.

2. To reduce the risk of fire and electric shock: a) Do not install on trees

having needles, leaves or branch coverings of metal or materials which
look like metal, and b) Do not mount or support strings in a manner that
can cut or damage wire insulation.

BATTERY CAUTION: 

Non-rechargeable batteries are not to be recharged. 
Always purchase the correct size and grade of battery most suitable for the 
intended use. 
Clean the battery contacts and also those of the device prior to battery installation. 
Ensure the batteries are installed correctly with regard to polarity (+and-). 
Remove batteries from equipment which is not to be used for an extended 
period of time. 
Remove used batteries promptly. 
Exhausted batteries are to be removed from the product. 
Always replace the whole set of batteries at once time, taking care not to mix 
old and new ones or batteries of different type, such as alkaline, standard 
(carbon-zinc) or rechargeable (nickel cadmium) batteries. 
Replace only with (3) AA Alkaline batteries. 
AA batteries (not included) 

Built-in timer relights every evening all season 
(5 hours on, 19 hours off) 

PLEASE READ USE AND CARE INSTRUCTIONS ATTACHED BEFORE 
TURNING THE LIGHTS ON. 
Once the lights are lit, they will remain lit for 5 hours. At the end of 5 hours 
the lights will automatically shut off. 
The lights will automatically turn on the next evening at the same time.  
This process will repeat throughout the entire holiday season until you turn 
the lights to the OFF position. 

Federal Communication Commission Interference Statement 

This device complies with Part 15 of the FCC Rules. Operation is subject to 
the following two conditions:  
(1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference 
that may cause undesired operation.  

Warning: 

Changes or modifications to this unit not expressly approved

by the party responsible for compliance could void the user's authority to 
operate the equipment. 

NOTE: 

This equipment has been tested and found to comply with the limits 

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses and 
can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 
-Reorient or relocate the receiving antenna. 
-Increase the separation between the equipment and receiver. 
-Connect the equipment into an outlet on a circuit different from that to which 

the receiver is connected. 

-Consult the dealer or an experienced radio/TV technician for help. 

For questions and /or assistance, call customer service at 1-877-398-7337 
or visit us on the web at www.geholidaylighting.com      

FP-21    PRINTED IN CHINA 

©2021 Nicolas Holiday Ltd.   204 Spring Hill Road Trumbull, CT 06611 
9F., No. 37, Guangfu North Rd. Taipei, Taiwan 10560   All rights reserved. 

TROUBLESHOOTING 

PROBLEM 

POSSIBLE CAUSE 

CORRECTIVE ACTION 

If the 
product 
does not 
light 

1. The product is not turned

on.

2. Batteries assembled

incorrectly.

3. Low power or dead

batteries.

1. Push button.
2. Follow battery installation

procedure.

3. Replace with new

batteries.

Reviews: