background image

1

English

UB-U01III/U02III/U03II User’s Manual

Copyright 

2003 by Seiko Epson Corporation

Printed in China

Standards and Approvals

Before Using

Be sure to read this manual carefully for effective and correct use of the 

product and store it in accessible location.

Key to Symbol 

The symbol in this manual is defined below. Read the following carefully 

before handling the product.

CAUTION:

Observe cautions to avoid minor injury to yourself or damage to your 
equipment.

The following standards are applied only to the boards 
that are so labeled. (EMC is tested using the EPSON 
power supplies and TM series printers.) 
Europe:

CE marking

North America:

FCC/ICES-003 Class A

Japan:

VCCI Class A

Oceania: 

AS/NZS CISPR22 Class A

WARNING

This is a Class A product. In a domestic environment 
this product may cause radio interference, in which 
case the user may be required to take adequate 
measures.
The printers in which this board is installed becomes 
class A devices.
The connection of a non-shielded printer interface cable 
to this board will invalidate the EMC standards of this 
device. You are cautioned that changes or 
modifications not expressly approved by Seiko Epson 
Corporation could void your authority to operate the 
equipment.

CE Marking

The printer conforms to the following Directives and 
Norms:
Directive 2004/108/EC

EN 55022 Class A
EN 55024

    IEC 61000-4-2

IEC 61000-4-5

    IEC 61000-4-3

IEC 61000-4-6

    IEC 61000-4-4

IEC 61000-4-11

FCC Compliance Statement 
For American Users

This equipment has been tested and found to comply 
with the limits for a Class A digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful 
interference when the equipment is operated in a 
commercial environment.
This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause 
harmful interference to radio communications. 
Operation of this equipment in a residential area is likely 
to cause harmful interference, in which case the user will 
be required to correct the interference at his own expense.

For Canadian Users

This Class A digital apparatus complies with Canadian 
ICES-003.

À l'intention des utilisateurs 
canadiens

Cet appareil numérique de la classe A est conforme à la 

norme NMB-003 du Canada.

Summary of Contents for UB-U01III









Reviews: