Part Number & Model Notes:
*BEE3®, BEE3®-EZ, LW-PX300 use only 203 & 205 shrink tube sizes. BEE3®+,
BEE3®-EZ+, & LW-PX350 use 203 through 211 sizes. LW-PX400, LW-PX700 & LW-PX750 use only 203-214 sizes.
**Cannot be used with PEARLabel® 360 ***Bulk Label Quick Kit only
For all "20#ST" Supplies
Shrinkage Rate:
50% or more in diameter, 15% or less in length. Ratios noted.
Temperature Range:
-55ºC to 125ºC (Operating)
Compliance Standards:
UL Standard 224 (Rated Temperature: 125°C, Rated Voltage: 300V,
Flame Resistance Grade VW-1), RoHS compliant
User Precautions
• Prints may appear distorted due to special surface materials. Prints may become diminished if the surface of the
tube is scratched or wiped with paint thinner, etc.
FOR LW-PX350
2. Press “Shift” + “Condition”. Arrow down to “PrnDensity”
and press “Return”.
3. Now arrow to “+3” and press Return.
4. Now enter characters. Then Print.
FOR LW-PX300
2. When the power is off, press “Print” + “Power”.
3. Arrow to +3, and press “Enter”.
4. Now enter characters. Then print.
FOR LW-PX800
2. Create label using Label Editor Software.
3. Choose File, Printer Settings. On the Graphics Tab,
Move concentration to + 3. Click OK. File. Print.
1. Place the tube over the wire or cable.
2. Blow hot air across the tube using a heat gun* to shrink the tube.
3. When the tube fits snugly against the surface, the shrinking process is finished.
DO NOT OVER HEAT THE SHRINK TUBE MATERIAL.
* Use a heat gun when performing the heat shrinking process in order to
achieve proper shrinking levels.
Use only a heat gun that meets industrial standards during the heat shrinking process. Use caution when
handling the heat gun.
Do not use soldering irons, cigarette lighters, an open flame or home hair dryers to avoid the accidental
ignition of a fire.
Do not apply heat to any surface for an extended period of time, even when the operating temperature
is within the recommended range.
Coloring of the tube may be altered, characters may disappear, and surfaces may be damaged or
discolored depending on the construction of the surface, the environmental conditions and the
conditions during adhesion.
Please select an unnoticeable location for testing the actual results of the product prior to use.
Avoid surfaces that do not provide sufficient heat resistance. Heat shrinking can damage surfaces that
are not conducive to high temperatures.
Avoid direct contact with the tubes during or immediately after shrinking to prevent injuries.
P: 800.622.6312
[email protected] | labelworks.epson.com
413762601
1. Set the cartridge in the printer.
Shrink Tube material requires a higher ribbon concentration to print solid characters on the thicker
shrink tube material. Based on your machine model, follow these instructions to increase print density.
Surface Mounting
Shrink tube - information deemed reliable but not guaranteed. See manufacturer's
specification sheet for further information. Test for your applications.
2001XLST, 2011XLB, 2012XLST, BEE3®, BEE3®+, 2020LSTB, 2020LSTB-PC, 2010-PC, 2011XLB-PC, 2012XLST-PC, PEAR
Label ® 270, PEAR Label ® 360, BEE3®-EZ, BEE3®-EZ+, LW-PX900, LW-PX800, LW-PX750, LW-PX700, LW-PX400,
LW-PX350, LW-PX300, LW-Z5010PX, LW-Z5000PX
Shrink Tube Instruction Manual
370 SMC Drive, PO Box 309, Somerset WI 54025
• When the tube shrinks, the printed characters may become distorted and difficult to read. Printed bar codes may
also become undecipherable.
• This product is not intended for use on any person or animal.
• Avoid storing this product in places with high temperatures or humidity. Do not expose this product to direct
sunlight, dust particles or the outdoors. For best results, use this product immediately after it is removed from its
packaging.
For LW-PX400 & iLabel App
(the datacom app has no density setting)
1. Tap the [gear] icon at the bottom right corner and
adjust to +3.
For LW-PX900, LW-PX750 & LW-PX700, LW-Z5010PX,
LW-Z5000PX
Print density is automatically set. No further settings are
necessary.
• Although the tube is made of insulating materials (polyolefin), it does not meet the standards set for insulated tube
construction. Do not use the tube in locations where withstand voltage capability is required.
Epson LABELWORKS PX
INK
COLOR
TUBE
COLOR
SIZE
AWG
SHRINK
RATIO
203STBWPX-90
3:1
.044-.105
1.11-2.66
205STBRPX
2:1
.130-.205
3.30-5.20
205STBYPX
2:1
.130-.205
3.30-5.20
205STBWPX
2:1
.130-.205
3.30-5.20
205STWBPX
2:1
.130-.205
3.30-5.20
205YLBBPX **
3:1
.075-.205
1.90-5.20
205STBGPX
3:1
.069-.160
1.75-4.06
208STBWPX-90
3:1
.091-.215
2.31-5.46
208B20BYPX
3:1
.095-.240
2.40-6.10
210STBWPX-90
3:1
3:1
3:1
3:1
3:1
3:1
3:1
3:1
3:1
.138-.315
3.50-8.00
211STBRPX
2:1
.228-.409
5.80-10.40
211STBYPX
2:1
.228-.409
5.80-10.40
211STBWPX
2:1
.228-.409
5.80-10.40
211STWBPX
2:1
.228-.409
5.80-10.40
1.11-2.66
1.11-2.66
2.31-5.46
2.31-5.46
1.40-3.10
2.40-6.00
2.40-6.00
1.40-3.10
214STBWPX **
2:1
.303-.492
7.70-12.50
214STBYPX **
2:1
.303-.492
7.70-12.50
221STBWPX **
2:1
.461-.768
11.70-19.50
221STBYPX **
B203STBW ***
B203STBY ***
B208STBW ***
B208STBY ***
BL203STBWX25 ***
BL208STBWX35 ***
BL203STBYX25 ***
BL208STBYX35 ***
2:1
.461-.768
.044-.105
.044-.105
.091-.215
.091-.215
.056-.122
.056-.122
.095-.236
.095-.236
11.70-19.50
3:1
3:1
3:1
as supplied
mm (min)
Internal
Diameter
Diameter
(in)
Range
of Wire
Diameter
(mm)
Range
of Wire
208B20BWPX
PART NO.
*Compatibility
203B20BWPX
203B20BYPX
3.2
5.7
5.7
5.7
5.7
5.4
4.8
6.4
9.5
3.8
3.8
7.0
7.0
6.4
6.4
3.2
3.2
10.9
10.9
10.9
10.9
13
13
20
20
3.8
3.8
7.0
7.0
BLACK
BLACK
BLACK
BLACK
WHITE
BLACK
BLACK
BLACK
BLACK
BLACK
BLACK
BLACK
BLACK
WHITE
BLACK
BLACK
BLACK
BLACK
BLACK
BLACK
BLACK
BLACK
BLACK
BLACK
BLACK
BLACK
BLACK
BLACK
BLACK
WHITE
RED
YELLOW
YELLOW
WHITE
BLACK
GREEN
WHITE
YELLOW
WHITE
RED
YELLOW
WHITE
WHITE
YELLOW
WHITE
WHITE
WHITE
WHITE
WHITE
YELLOW
YELLOW
YELLOW
YELLOW
YELLOW
WHITE
YELLOW
WHITE
BLACK
1/8”
3/16”
3/16”
3/16”
3/16”
3/16”
3/16”
1/4”
1/4”
3/8”
1/2”
1/2”
1/2”
1/2”
9/16”
9/16”
7/8”
7/8”
1/4”
1/4”
1/4”
1/4”
1/4”
1/8”
1/8”
1/8”
1/8”
1/8”
1/8”
16-22
8-12
8-12
8-12
8-12
10-18
10-20
6-18
6-18
4-12
210STBWPX
3:1
.138-.315
3.50-8.00
9.5
BLACK
WHITE
3/8”
4-12
2-8
2-8
2-8
2-8
0-5
0-5
0000-1
0000-1
6-18
6-18
6-18
6-18
6-18
14-22
14-22
14-22
14-22
14-22
14-22
.055-.150
.055-.150
1.40-3.30
1.40-3.30
.095-.240
2.40-6.10
