Economical, electric storage water heaters
that fit almost anywhere
Save space.
Save money.
Model
W152 / W154
Submittal Sheet
Job Specifications
Specifications
Point-of-Use Water Heaters
Printed in USA
HWD313-07A-45-02
© 2007 InSinkErator
The Emerson logo is a trademark and
service mark of Emerson Electric Co.
InSinkErator is a division of
Emerson Electric Co.
1-800-558-5712
x8025, 8030, 8083
www.insinkerator.com
Dimensions
• Bronze, long-life storage tank.
Nothing to corrode or wear out.
• Screw-in copper heating element can be
easily replaced.
• Tank is insulated with expanded polystyrene,
then jacketed in steel for maximum heat
retention, minimum standby heat loss.
• Super fast recovery rate for better service.
• Drain provided for easy maintenance.
• Easy to install. Fits almost anywhere —
under sinks, in cabinets, etc.
• Adjustable temperature range of
110° to 170° F.
• Operates on ordinary house current.
• 3-1/2 foot cord and grounded plug.
• One year full warranty covers all parts,
labor and onsite repairs by an InSinkErator
service agency.*
Tank Construction
Bronze
Voltage
120 volts
Heating Capacity
1500 watts
Element Type
Replaceable
Copper/Bronze
Temperature Range 110°F – 170°F
Operating Pressure
150 psi (max.)
Thermostat Type
Resettable
First Hour Rating
(80°F Rise)
W152 / 8.6 gallons
W154 / 10.4 gallons
Tank Volume
W152 / 2.5 gallons
W154 / 4 gallons
Water Connections 1/2" NPT female
Pressure Relief
Connection
3/4" NPT female
Overall Dimensions W152
13.5"H
10.4"D
10.7"W
W154
20.2"H
10.4"D
10.7"W
Sample Specification
Point-of-use water heater(s) shall be
InSinkErator 2-1/2 gallon Model W152 or
4 gallon Model W154 with bronze storage
tank and adjustable temperature from 110°F
to 170°F.
Warranty:
1-year parts and on-site service. Limited 5-year
warranty against tank leakage.
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
10.4"
13.5"
W152
8.4"
Front
10.7
"
Back
T & P VALVE
(OPTIONAL)
COLD WATER INLET VALVE
(NOT SUPPLIED)
10.4"
20.2"
W154
8.4"
Front
10.7"
Bac
k
must be InSinkErator compatible copper with bronze base.
