background image

Dell 2000FP LCD Monitor Service Guide 

                                                                                                        Engineering Specification

 

 
 

 

 

 

 

 

Confidential 

 

 

1

Table of Contents 

 

1. Introduction............................................................................................................................................2

 

2. Pacific Specification.............................................................................................................................2

 

Appendix 0 – AC/DC power adapter.........................................................................................................6

 

Appendix 1 – Video Connector.................................................................................................................7

 

Appendix 2 – Labels and Markings ...........................................................................................................8

 

Appendix 3 – Preset Mode Timings .........................................................................................................8

 

Appendix 4 – OSD Operation Procedures ...............................................................................................9

 

Appendix 5 – Special Indication ...............................................................................................................14

 

Appendix 6 – Translation List ...................................................................................................................15

 

Appendix 7 – EDID Content......................................................................................................................15

 

Appendix 8 – Power State Maximums .....................................................................................................18

 

Appendix 9 – LCD Module Specification................................................................................................18

 

Appendix 10 – Mechanical Specification................................................................................................18

 

Appendix 11 – Regulatories......................................................................................................................19

 

Appendix 12 – LCD Module Defects.......................................................................................................20

 

Appendix 13 – FOS Specifications (Draft)..............................................................................................21

 

Appendix 14 – FOS Notes.........................................................................................................................21

 

Appendix 15 – Shipment Conditions ........................................................................................................22

 

 

Summary of Contents for 2000FP



















































Reviews: