background image

 
 

 

 
 
 
 
Before You Begin 

It’s best to use a computer with an Ethernet adapter for configuring the DWL-6000AP. 
The default IP address for the DWL-6000AP is 

192.168.0.50

 with a Subnet Mask of 

255.255.255.0

. You will need to assign your computer a Static IP address within the 

same range as the DWL-6000AP’s IP address for the purpose of configuring the DWL-
6000AP. 

See the Appendix if you need assistance in assigning a Static IP address 

for your network adapter. 

 

Check Your Package Contents 

These are the items included with your DWL-6000AP purchase: 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 

If any of the above items are missing, please contact your reseller. 

©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective 

holders. Software and specifications subject to change without notice. DWL-6000AP.01232003 

This product can be set up using any 
current web browser, i.e., Internet 
Explorer 5x, Netscape Navigator 4x. 

DWL-6000AP

D-Link 

Air

Pro™ 2.4GHz/5GHZ

Wireless Access Point

 

 
• DWL-6000AP Wireless Access Point 
 
 
 
• CD-ROM (containing Manual and 
Warranty) 

 

 
• Ethernet (CAT5 UTP/Straight Through) 
Cable 
 
 
 
• 5V DC, 2.5A Power Adapter

 

        Using a power 

         supply with a 

different voltage rating 

will damage and void 

the warranty for this 

product. 

Summary of Contents for AirPro DWL-6000AP













Reviews: