Next, TURN OFF the computer and unplug
the power cord.
Quick Installation Guide
DFE-520TX
10/100Mbps Ethernet PCI Adapter
Check Your Package Contents
DFE-520TX
CD with Manual and Drivers
Installing the DFE-520TX Drivers
A.
Insert the driver CD,
which is included with the DFE-520TX, into the CD-ROM of your
computer.
B.
Click “Install Drivers”. When prompted “Installation Complete”, click OK. If prompted to
restart (for Microsoft Windows 98/ME only), click “Yes”.
Installing the DFE-520TX into the computer’s PCI slot
A.
Power off your computer and disconnect the power cord.
B.
Remove the back cover of your computer. (Refer to your computer’s manual if needed.)
C.
Locate an available PCI slot. PCI slots are usually white or cream coloured.
D.
Remove the back plate (the small piece of metal that covers the opening for the PCI card
on the back cover that you just removed.)
E.
Insert the DFE-520TX carefully and firmly into the PCI slot.
DO NOT insert the DFE-520TX into the computer’s
PCI slot before installing the drivers.
Caution: To avoid damage caused by static electricity, make sure to properly
ground yourself by first touching a metal part of your computer to discharge any
static electricity before working with the DFE-520TX Ethernet Adapter.
