PTD 1 – Working procedure
Please note that that there might be some deviations to the final HMI-concept
(final Software-Configuration)
Please note also that there is a bug in the current software: if you have reached an ambient
temperature of 28 °C on the display there will be following indication: “Lo” (this is a software mistake!)
1. Switching On an Off
There are following possibilities to switch on the tool:
-
Switch on the tool by pressing the
On/Off-button (13)
-
Switch on the tool by pressing the
Measuring-button (4)
-
Switch off the tool by pressing the
On/Off-button (13)
If no button will be pressed for four minutes, the tool will automatically switch off to save
battery capacity.
