1 | Overview
1
PREV (
)
2
ENTER (
▬
)
3
NEXT (
)
4
7
ESC (
)
CMD (#)
8
0
9
5
6
Area 1
Ready to turn on
Display
The keypad shows the status of the security system. When several events
occur, the keypad shows each event in order of priority.
*As configured by your security company.
NOTICE! The Access menu and the option to configure a card are available on compatible security systems only.
Status indicators
The indicators show how your system is operating.
Part On status
Green - Ready to turn Part On (part arm). Red - Part On (part armed).
Power
Blue - AC power present.
Trouble
Yellow - A Trouble condition exists.
All On status
Green - Ready to turn All On (arm). Red - All On (armed).
Navigation and Function keys
These keys start the backlighting and the tones.
Command
Function
[CMD] 0
Bypass
[CMD] 0 0
Unbypass
[CMD] 1
All on (with delay)
[CMD] 1 1
All On, Instant
[CMD] 2
Part On, Instant
[CMD] 3
Part On (with delay)
[CMD] 4
Silence Trouble Sounders
[CMD] 4 0
See Alarms
[CMD] 4 1
Test Report
[CMD] 4 2
Status Report
[CMD] 4 3
RPS Answer
[CMD] 4 4
Intrusion Walk Test
[CMD] 4 5
Date and Time
[CMD] 4 6
Door Control Menu
[CMD] 4 7
Reset Sensors
Command
Function
[CMD] 4 9
Change Display
[CMD] 5 0
Go to Area
[CMD] 5 1
Extend Close
[CMD] 5 2
SKED Menu
[CMD] 5 3
Delete User
[CMD] 5 4
Output Change Menu
[CMD] 5 5
Change Passcode
[CMD] 5 6
Add User
[CMD] 5 7
Default Text
[CMD] 5 8
Fire Walk Test
[CMD] 5 9
Show Revision
[CMD] 6
Watch Mode
[CMD] 7*
Special Alert _____________
[CMD] 8
Open Main Menu
[CMD] 9*
Special Alert _____________
PREV (
p
) and NEXT (
q
)
Use [
PREV] (previous) and [NEXT] to scroll through lists and text.
ESC (
Ø
)
Use [ESC] (escape) to exit from menus and functions, or
to delete letters or numbers.
ENTER (
▬
)
Use [ENTER] after entering your passcode, to select an item, or
to enter Yes to a request.
CMD (#)
Use [CMD] (command) in combination with one or
two number keys to perform select functions.
Commands
You can operate functions
with the [CMD] plus one or
two digits.
Touch the [CMD] key, then
enter the command.
- or -
After you press [CMD],
then use [PREV] and
[NEXT] to move through the
commands. To engage the
command, touch [ENTER].
Use [CMD]8 to open the Main
menu.
Menu tree
[CMD] [8] shows the menu tree. Each option has a number. Touch the number for the desired menu, or use [PREV] or
[NEXT] to review your options, and then touch [ENTER] when you see the desired option.
