background image

1

ELECTRONIC WATER TIMER INSTRUCTIONS

Model 56611 Specifications

Water Connection: 3/4”

Hose Connection: 3/4”

Watering Cycles: 16 watering selections

Batteries: 2 - “AA”

Low battery Detection: [    LOW BAT] will display on LCD.   

Timer will stop running when battery voltage is low.   

If timer is  running it will automatically shut-off.  

Note:

 Batteries should last 1 season with average usage.   

Use of the mist cycle will shorten battery life.

Important Safety Information

1.  Warning: This timer is intended for outdoor, residential watering  

 

applications only.  Not intended for indoor or commercial use.

2.  Use fabric reinforced hoses only; damaged or cracked hoses should  

 

not be used. 

3.  Remove the timer from the faucet during freezing weather and store  

 

inside.  Exposure to temperatures below 0°C (32°F) may damage the unit.

4.  Timer should not be submerged in water, used in damp pits, or buried.

5.  Check connections regularly for a tight seal.

6.  When using for the first time, observe the progress for one week to 

 

 

ensure that it is operating properly.

7.  Before a long absence/vacation, insert new batteries and test your program.

Summary of Contents for 56611









Reviews: