background image

 

 

 

 
 

 

 

Quick   
Installation   
Guide 

A quick look

 

Five LAN Gigabit ports 
USB 3.0 port x 1   
WPS button x 1   
Power on off button x 1 

 

Wi-Fi LED:

 

2.4G LED / 5G LED:   
Three LEDs on: 

RP-AC68U has good signal 

connection with router.

 

Two LEDs on: 

RP-AC68U has normal 

signal connection with router.

 

One LEDs on: 

RP-AC68U has weak signal 

connection with router. 

 

Off: 

RP-N12 doesn’t connect to a router. 

 

 

 

Plug your RP-AC68U into a 

power outlet 

Near

 your 

Router/AP

 

 

 

 

 

Method One

 

Quick Setup using the WPS Button 
Use this if your Router or Access Point(AP) support WPS

 

 

Power On

 

 

 

 

Push the two WPS buttons

 

Push the WPS button on your 
Router/AP

 

Immediately push the WPS 
button on your RP-AC68U 

 

 

The Stylish LED should go to 
flashing in about 2 minutes. 
Wait until the Wi-Fi LED turn 
on. You could know the 
signal quality with different 
LED number.

 

 

 

 

Relocate RP-AC68U to a location you like.

 

After the extender is relocated to a new place, RP-AC68U will reconnect to your router automatically in about one minute.

 

The ideal location for RP-AC68U is between your wireless 
router and wireless device. 

Make sure RP-AC68U is in a location where signals 
indictor LED has over 2 led on at least.   

Keep the RP-AC68U away from

 devices like cordless 

phones, Bluetooth devices and microwave ovens to 
minimize wireless interference. 
 
If possible, try to place your extender in open 
corridors or spacious locations rather than a 
crowded room. 

Enjoy! 

The Range Extender shares your router’s Wireless Network Name (SSID) and 
Wireless Password 

Frequently Asked Questions (FAQ) 

Q1: What should I do if my router doesn’t have a WPS button? 
A1: You can use Method Two to set up RP-AC68U 

Q2 Why is that the Wi-Fi LED does not light up after completing Method Two? 
A1: You may have entered the wrong router SSID and password. Reset your RP-AC56, 
double check your router SSID/password, and set up RP-AC56 again. 

Q3 How do I reset RP-AC68U 
A1: Press the RESET button on the button of RP-AC68U for about two (2) 
seconds. Wait for about five (5) seconds until the LEDs blink slowly. 

RP-AC68U 

Dual band Wireless Ranger Extender 

Reset button 

Summary of Contents for RP-AC68U

Page 1: ... router automatically in about one minute The ideal location for RP AC68U is between your wireless router and wireless device Make sure RP AC68U is in a location where signals indictor LED has over 2 led on at least Keep the RP AC68U away from devices like cordless phones Bluetooth devices and microwave ovens to minimize wireless interference If possible try to place your extender in open corridor...

Page 2: ... and wireless device Make sure RP AC68U is in a location where signals indictor LED has over 2 led on at least 1 On a web browser enter http repeater asus com 2 Connect to a Wi Fi network and when prompted enter the security key If your Wi Fi network is hidden click Manual setting 3 You can either tick Use default setting or enter the SSID and security key password for your extended network When d...

Page 3: ...l interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver...

Page 4: ...imiser les contacts humains lors du fonctionnement normal Ce périphérique a été évalué et démontré conforme aux limites SAR Specific Absorption Rate Taux d absorption spécifique d IC lorsqu il est installé dans des produits hôtes particuliers qui fonctionnent dans des conditions d exposition à des appareils portables les antennes se situent à supérieur de 20 centimètres du corps d une personne Ce ...

Reviews: