Montage Einspeiseblock, Einspeise element
Fig. 1
Demontage Einspeiseblock, Einspeise element
Fig. 2
Montage der Hilfsklemmen LA und LB
Einspeiseblock
Fig. 3
Einspeisebeispiele
Fig. 4–10
Der IP Schutz muss durch den Errichter erstellt
werden.
Montage sur les socles, Bloc d’alimen-
F
tation, Elément d’alimentation
Fig. 1
Démontage, Bloc d’alimen tation, Elément
d’alimentation
Fig. 2
Montage des bornes auxiliaires LA et LB Bloc
d’alimen tation
Fig. 3
Exemples d’alimentation
Fig. 4–10
La protection de la propriété intellectuelle doit
être créé par l'installateur.
Assembly to plug-in socket system,
G
Incoming Terminal Block standard,
Incoming Terminal Block oversize
Fig. 1
Disconnection, Incoming Terminal Block
standard, Incoming Terminal Block oversize
Fig. 2
Assemble auxiliary terminals LA and LB Incoming
Terminal Block standard
Fig. 3
Supply variants
Fig. 4–10
La protection de la propriété intellectuelle doit
être créé par l'installateur.
ABB Switzerland Ltd
Low Voltage Products
Fulachstrasse 150
CH-8201 Schaffhausen
Phone: +41 58 586 41 11
Fax:
+41 58 586 42 22
www.abb.com
ABB Inc.
8155 T&B Blvd.
Memphis, TN 38125
Technical Support:
E-Mail: [email protected]
Phone: 1-888-385-1221 Option 1
U L d a t a
For all types:
Feeder Blocks cat. nos. ZLS250 – ZLS253, ZLS954UL, ZLS959UL are suitable for use in feeder circuits up to 600 V
Wire required to be fixed 2 inches (50.0 mm) below entry point of component housing by suitable cable ties
Rated Voltage:
600 V AC
Rated Current (side feed, left or right):
125 A
Rated Current (center feed):
250 A max. when used with two feeder blocks
Short Circuit Rating:
50 kA, max. 480 VAC and 480 Y/277 V and 240 VAC
Short Circuit Protection:
150 A Fuse or Circuit-Breaker (DIVQ/7) with maximum rating
of 250 A, located at Line Side
Torque:
2.0 Nm
Stripping length:
21 mm
Wire size:
2 AWG - 1/0 AWG
Wire rated min. 600 V and 75 °C (AVLV2/8)
For all types:
Feeder Blocks cat. nos. ZLS224, ZLS224R, ZLS225 and ZLS225R are suitable for use in feeder circuits up to 250 V
Rated Voltage:
250 V AC
Rated Current (side feed, left or right):
125 A
Rated Current (center feed):
250 A max. when used with two feeder blocks
Short Circuit Rating:
50 kA, max. 240 VAC
Short Circuit Protection:
150 A Fuse or Circuit-Breaker (DIVQ/7) with maximum rating
of 250 A, located at Line Side
Torque:
4.0 Nm
Stripping length:
18 mm
Wire size:
10 AWG - 1/0 AWG
Wire rated min. 600 V and 75 °C (AVLV2/8)
1
max. 125 A (UL+IEC)
max. 125 A
max. 125 A
max. 150 A (UL)
max. 160 A (IEC)
1
2
> 30°
max. 125 A
max. 125 A
max. 150 A (UL)
max. 200 A (IEC)
max. 125 A
max. 125 A
max. 250 A (UL+IEC), same cable length
max. 125 A
max. 125 A
max. 250 A (UL+IEC)
max. 125 A
max. 125 A
1
2
4
5
3
max. 125 A (UL)
7
max. 125 A
max. 125 A
max. 250 A (UL+IEC)
max. 125 A
max. 125 A
10
6
9
8
